HOW TO OPERATE ON BOTTLE JACK AND JACK STAND

HOW TO OPERATE ON BOTTLE JACK AND JACK STAND

Here we need to learn some tips on how to use bottle jack and jack stand together to keep us safe when we are under the car. If you operate them in the correct way. It will help you a lot and keep you well.

Step one:

take the product out of the box. It is very simple to set up with the handle, all you are going to do is make sure that the oil valve is closed so you turn it clockwise one circle. Not turn it until last step. Because it is easy to get the oil valve turn out then the oil will get out.

Step two:

adjust the screw height adjustment so you need to do that before you start lifting the vehicle and get it to the right height.

Now you are ready to start all you need to do is put the handle into the pump and start lifting the hydraulic ram. So you see the hydraulic ram popping up, a couple of safety things to point out later. Because these are really high capacity and lifting very heavy things. There’s a small working area down the bottom. It really try to get the flattest ground you can work with. It is important that the car doesn’t move so it will be very handy to chock the wheels to make them secure. Put the park brake on that should be all that you really need to do.

Step three:

The good thing to know about the range of bottle jack is that they are compliant to the strict standard. As you can see it’s pretty easy to use. It is very important for you to remember that you never work under a car without the support of a jack stand your garage jack is to lift the vehicle. The jack stand is to support the vehicle so you need these under for safety. Now you’ve got a variety range of jack stands. You’ve got your 2ton, 3ton as well as 3ton in the range so each with the ratchet system. Now with the ratchet. It’s a simple operating system where you lift this up to place them down when you are putting it under the car all you do is lift it up until it takes its set to the height that you want as with any jack we need to find the jacking joint under the car. All you do is lift it up until it takes to the height that you want.

Step four:

Raised the car by the bottle jack you are at the point where you need the jack stand supports the weight of   car. Never ever work under the car without the jack stands. You raise the saddle of the jack stand, the ratchet will do its job, get it to the highest point. You can release the load from the bottle jack itself onto the jack stand. Anti-clockwise to release the jack. Now the jack stand has the weight of the car at this point you’ve done the work that needed to be done under the car, you need to take the jack stand back.

The last and most important thing is that you raise the jack back up, take the weight off the jack stand. Grab the saddle of the jack stand lift it up and at the same time lift the handle. Careful not to pinch yourself as it is coming down. Slide it out, then you can release the jack and away you go well.