Menu
China scissor jack manufacturers, OEM & ODM service, quality warranty, CE & ROHS approved!
We are a professional hydraulic jack ,floor jack,scissor jack and scissor jack manufacturers,suppliers based in China
Bottle jacks have a small form factor and are easy to store. It also has a lifting capacity of up to 50 ton more than a scissor jack, but in most cases a 2 ton rated jack will suffice. The 2 ton (4000 lbs) jack is relatively inexpensive and can lift most sedans and SUVs, making it an ideal jack for home repairs.
If you’re using a scissor jack, insert the rod, or place the wrench over the knob and begin to crank to the right. It should slowly rise and engage with the vehicle, which will add some resistance. Keep going.
A scissor jack uses a simple theory of gears to get its power. As the screw section is turned, two ends of the jack move closer together. Because the gears of the screw are pushing up the arms, the amount of force being applied is multiplied.
it was determined that a Nickel-Chromium- Molybdenum steel alloy may be possible material to construct the proposed scissor jack. The particular alloy has a classification of AISI 4340 engineering steel in industries use. before replacing the plug. Use a funnel to avoid spills. Do not use any other type of oil besides hydraulic jack oil.
Major components include, a base that sits on the ground and stabilizes the jack, arms that rotate at points generating a 4-bar linkage , top piece that connects to the car, a threaded rod that pull the arms together, causing the top to raise, and a thrust bearing that allows the threaded rod to rotate under force.
Stand Material, There is not a lot of variance in jack stands but the material they are made out of can make a big difference. Small, lightweight stands tend to be made out of aluminum or light steel. Jack stands made for heavy duty vehicles should be made of cast iron or steel.
A scissor jack has four main pieces of metal and two base ends. The four metal pieces are all connected at the corners with a bolt that allows the corners to swivel. A screw thread runs across this assembly and through the corners.
Car Jack is heavy operational equipment and it requires rigorous human efforts to lift the load of vehicle. Existing scissor jacks are based on power screw principle, hence required to apply large number of efforts in rotational direction.
Jacks are pretty simple; they’re pistons that use hydraulic pressure to lift cars (or whatever you’re working on) into the air via a system of pipes and chambers. The reason they fail is either because rubber seals wear out or the check balls (tiny little BBs that help move the hydraulic fluid between chambers) fail
We will contact you within 1 working day, please pay attention to the email with joanna@yxjack.com，whatsapp:+831377312985
